100x100xT1mm HR@400-900nm Dielectric Mirror (UVFS)

Navigation Path:
OPTICS / MIRRORS / BROADBAND DIELECTRIC MIRRORS / 400-900nm BROADBAND HR DIELECTRIC MIRRORS / 100x100xT1mm HR@400-900nm Dielectric Mirror (UVFS)

P/N: PBB-R02-40F-10001000-0100

PHOTONIK BRAND Broadband Dielectric Mirrors offer excellent reflectivity of R>99% for 400-900nm spectrum.

A dielectric mirror is a type of a mirror composed of multiple thin layers of dielectric material, typically deposited on a substrate of glass or some other optical material. By careful choice of the type and thickness of the dielectric layers, one can design an optical coating with specified reflectivity at different wavelengths of light. Dielectric mirrors are also used to produce ultra-high reflectivity mirrors: values of 99.999% or better over a narrow range of wavelengths can be produced using special techniques.
Alternatively, they can be made to reflect a broad spectrum of light, such as the entire visible range or the spectrum of the Ti-sapphire laser. Mirrors of this type are very common in optics experiments, due to improved techniques that allow inexpensive manufacture of high-quality mirrors. Examples of their applications include laser cavity end mirrors, hot and cold mirrors, thin-film beamsplitters, and the coatings on modern mirrorshades.

Substrate Material:	UVFS
Outer Dimension:	100.0×100.0, -0.2/+0.0mm
Thickness:	1.00, +/-0.05mm
Flatness:	<Lambda/10@633nm over 25mm area on-jig tested
Surface Quality:	20-10 S/D
Front Surface:	R>99.5% for S and P polarization for angles of incidence from 0-deg to 45-deg at 400-900nm typical (400-900nm minimum range)
Back Surface:	Fine polished, 20-10 S/D, uncoated
Clear Apeture:	>90% of outer dimension
Laser Damage Threshold:	2kW/cm2 CW,100mJ/cm2 10ns pulse
Edge Surface:	Ground only,with protection chamfer 0.25mmx45deg
Pricing Overview and Stock Availability:	Go back to Main Product Series Page

Because you searched for this, you may also be interested in: