355nm 10.0×10.0xH5.0mm PBS Cube(High Power)

P/N: PBSC-355-10-H5-HP

Polarizing beam splitter cubes are used to split a laser beam into two orthogonally polarized components; p-polarization is transmitted straight through while s-polarization is reflected at 90-deg.
PBS Cube is commonly made by precisely cementing two triangular optical prisms together at their hyoptenuse using polyester, epoxy, or urethane-based adhesives.
PHOTONIK polarizing beam splitter cubes utilize a durable all-dielectric optical coating at the internal cemented interface, (Dichroic mirrored prism assembly); and all external surfaces are antireflection coated for the wavelength specified. For best spectral performance and transmitted wavefront, cube beamsplitters should be used with collimated or near-collimated input light. The PBS and other cemented beamsplitter cubes are easy to mount, mechanically durable and ideal for use up to 1 J/cm2 at 1064 nm.

Substrate Material:	UV fused silica (Corning 7980)
Design Wavelength:	355nm (center)
Operation Wavelength:	345 ~ 365nm
Wavefront Distortion:	<Lambda/10 at 633nm typ over clear aperture.
Surface Quality:	20-10 scratch and dig
Outer Dimension:	10.0×10.0,+/-0.1mm; Height: 5.00+/-0.08mm
Parallelism:	< 20″
PBS Coating:	Full dielectric coating, high energy
PBS Configuration:	Epoxy-free; fully optically cemented
Extinction Ratio:	Tp:Ts > 2000:1
Transmission Efficiency:	Tp > 97% @ 355nm; Ts<0.03%@355nm
Reflection Efficiency:	Rs > 99.5% @ 355nm
Reflected Beam Deviation:	90 deg +/-5 arc min
Anti-Reflection Coating:	R<0.25% @ 355+/-20nm
Clear Aperture:	>85% of dimension
Damage Threshold:	5J/cm2, 8nsec pulse; 1MW/cm2, CW at 1064nm typ.

Because you searched for this, you may also be interested in: